The Leading Computer Mount for Aero Extensions
Highly Configurable TT Mount for Computers, Lights, Cameras & CDA Devices
RE-STOCKED WEEKLY - Demand is very high at the moment so we are restocking in small batches as quick as we can. We manufacture and assemble components in-house in the UK.
Sign up below to be notified when we restock.
Building on previous versions that have been used by world, Olympic, and Ironman champions the latest 3.0 version of our TT mount features a new 'Clip' module system for fast changes between devices. A 'no-turn' computer insert is now standard and can be easily configured to suit almost any set-up and extensions.
Recommended and fitted by extension manufacturers and bike fitters including; Drag2Zero, Sync Ergonomics, 51 Speedshop, Matt Bottrill, Ivan O'Gorman.
- Standard widths 50mm to 90mm bars centre to centre (28-68mm inside to inside).
- Extra-wide brackets available for widths 90mm to 130mm bars centre to centre (68-108mm inside to inside). Purchase these brackets in addition to the mount.
- 'No-turn' inserts for Garmin or Wahoo. The computer stays still whilst a lever locks the computer in place. The computer will therefore fit in narrow gaps between extensions.
- Attaches to bars with hypalon hook and loop straps for easy adjustment (can be cut to length).
- Fits all round profile bars and most shaped bars including Zipp Vuka, AeroCoach Angles, Sync 2.0 Evo, Profile Design 43 ASC.
- Right angled brackets available to fit Drag2Zero USP, 51 Speedshop Rev and other bars with near right angle inside top profiles. Purchase these brackets in addition to the mount.
- 'Clip' modules available for GoPro (many lights have a GoPro style fitting option), Exposure Trace, band-on lights (universal), blank cover supplied as standard for. Note that 'Clip' modules only work with 3.0 Mounts. The modules only suitable devices weighing under 100g.
Weight: 33g when no spacers used
Material: MJF Nylon PA12 - manufactured in house
Hypalon strap
Additional contents:
Spacers and stainless steel screws provided to allow fine-tuning.
Spacers: 2x2mm, 2x3mm, 2x5mm, 2x10m, 2x angle adjust.
Screws: 2x M4x20(fitted), 2xM4x25, 2xM4x30, 2xM4x35, 2xM4x40.
Use the message facility -> if you have question that isn't answered here.
Will this fit my extensions?
The standard brackets will fit all round and the majority of profiled extensions. For flat topped extensions such as D2Z or 51 SpeedShop Evo the right angled brackets are a better fit. Vision TFE Pro brackets are specific to the particular size. If you are unsure or your extensions have a concave top surface then use the message system or email info@76projects.com to contact us.
I'm not sure if I need extra wide brackets.
The standard brackets will fit a gap of 28-68mm between extensions at the mounting point. Extra wide will do 68-108mm between extensions.
Can I fit a device weighing over 200g?
We don't recommend it due to the excessive stress that may be put on the joints of the mount. Particularly over bad road surfaces.
Do you plan to do versions to fit other computer brands?
At this point we have no intention of doing so. In the past, we had produced inserts to suit other computers, but demand was very low. 3rd part adapters are generally available to so other computers may fit a Garmin insert.
Can I use a Garmin extended battery with this mount?
The Garmin battery requires specific details that this mount cannot accommodate. However we do offer the Ultra Distance TT mount which does work with the battery.
We hate it went a product has to be junked when a part can't be replaced. If spares aren't listed then message us -> and we'll see if we can help.